Our experimental environment consists of a wooden frame with embedded metal rods via which the individual modules are supplied with power. Many different modules allow a quick test setup. The individual modules can be connected using cables with 2 mm plugs.

Insert picture

Available modules

Power Supply

Name	Description	Link
Power adapter 5V/3A , 3.3V/1A	The power supply module is available in different versions. Older versions only have a 5 V output, newer versions also have a 3.3 V output.	more
DC/DC Converter +/- 12V	to do
DC/DC Converter +/- 15V	to do

Display

Name	Description	More
Tri-State LED's	The Tri-State LED module offers 8-Tri-State LED's, with 3 states, on, of and floating.	more
LCD-Display (2x16)	This module provides a two-line LCD display with 16 characters per line.	more
I²C-Display	to do

Switch

Name	Description	Picture	More
Switch debounced	to do

Motors / Power Amplifier

Name	Description	Picture	More
Motorprint 3.0	to do
Motorprint Maxon	to do
2-Phase Stepper Motor	to do

Sensor

Name	Description	Picture	More
TCRT1000 Reflective Optical Sensor	With the TCRT1000 reflective optical sensor, reflective objects can be detected at short distances without contact. The sensor consists of a GaAs infrared LED and an NPN phototransistor.		more

Microcontroller / SoC

Name	Description	Picture	More
Microzed Board (Zynq7000)	to do
RT-Board	to do

Interface

Name	Description	Picture	More
RS-232 Level converter	to do
RT-Board	to do
Line Receiver	to do

Adapter

Name	Description	Picture	More
Texttool 20 pin	to do
Texttool 24 pin	to do

Signal Generator

Name	Description	Picture	More
TTL-Oscillator	to do

Various

Name	Description	Picture	More
R-2R DA converter	to do
M3 Rapid Prototype Board	to do
Voltmeter	to do
OpAmp Analog Board	to do

Seitenhierarchie

Experimental System