Our experimental environment consists of a wooden frame with embedded metal rods via which the individual modules are supplied with power. Many different modules allow a quick test setup. The individual modules can be connected using cables with 2 mm plugs.

Insert picture

Available modules

Power Supply

Name	Description	Link
Power adapter 5V/3A , 3.3V/1A	The power supply module is available in different versions.Older versions only have a 5 V output, newer versions also have a 3.3 V output.	more
DC/DC Converter +/- 12V	to do
DC/DC Converter +/- 15V	to do

Display

Name	Description	More
Tri-State LED's	The Tri-State LED module offers 8-Tri-State LED's, with 3 states, on, of and floating.	more
LCD-Display (2x16)	This module provides a two-line LCD display with 16 characters per line.	more
I²C-Display	to do

Switch

Name	Description	Picture	More
Switch debounced	to do

Motors / Power Amplifier

Name	Description	Picture	More
Motorprint 3.0	to do
Motorprint Maxon	to do
2-Phase Stepper Motor	to do

Sensor

Name	Description	Picture	More
TCRT1000-Distance sensor	to do

Microcontroller / SoC

Name	Description	Picture	More
Microzed Board (Zynq7000)	to do
RT-Board	to do

Interface

Name	Description	Picture	More
RS-232 Level converter	to do
RT-Board	to do
Line Receiver	to do

Adapter

Name	Description	Picture	More
Texttool 20 pin	to do
Texttool 24 pin	to do

Signal Generator

Name	Description	Picture	More
TTL-Oscillator	to do

Various

Name	Description	Picture	More
R-2R DA converter	to do
M3 Rapid Prototype Board	to do
Voltmeter	to do
OpAmp Analog Board	to do

Seitenhierarchie

Experimental System