Seitenhistorie

Overview

The „ecmasterlib“ offers an easy way to use EtherCAT with EEROS or in a standalone project.

• EtherCAT stack: The EtherCAT stack from Acontis, see The Acontis EtherCAT Stack.

• ecmasterlib: This library provides an easy interface to the EtherCAT stack. The library initializes the stack and takes over the periodic sending and receiving of the data on the bus. It provides the following basic interfaces

  • Elmo.hpp: An interface for Elmo drives

  • Beckhoff/EL1008.hpp: An interface for digital input terminal

  • Beckhoff/EL2008.hpp: An interface for digital output terminal

  • Beckhoff/EL3004.hpp: An interface for analog input terminal

  • Beckhoff/EL4004.hpp: An interface for analog output terminal

You may need to implement your own interfaces for other drives and terminals.

• Image Added

  
  

Installation

Once the EtherCAT stack has been installed and the demo application is running, the ecmasterlib can be installed.

cd path/to/working/directory
git clone https://gitlab.ost.ch/tech/inf/public/ecmasterlib

cd ecmasterlib
mkdir externalLib

cp ''<classB_path>''/SDK/LIB/Linux/x64/libAtemRasSrv.a externalLib
cp ''<classB_path>''/SDK/LIB/Linux/x64/libEcMaster.a externalLib

mkdir build-x86-64
cd build-x86-64
cmake -DCMAKE_INSTALL_PREFIX=/absolute/path/to/working/directory/install-x86-64 ..
make
make install

Device Interface

The ecmasterlib offers device interfaces for Elmo drives. To use this interface, the PDO's must be correctly configured. This can be done e.g. with ECEngineer. TODO link ELMO

• Elmo.hpp: An interface for Elmo drives

• Beckhoff/EL1008.hpp: An interface for digital input terminal

• Beckhoff/EL2008.hpp: An interface for digital output terminal

• Beckhoff/EL3004.hpp: An interface for analog input terminal

• Beckhoff/EL4004.hpp: An interface for analog output terminal

Functionality

The examples show how to use the interfaces, e.g.

ecmasterlib::device::beckhoff::EL1008 inputs{};
auto &stack = ecmasterlib::EcMasterlibMain::createInstance(argc, argv, inputs);
 
std::cout << inputs[0] << std::endl; // reads first digital input channel

You create an interface instance which must be passed to the EtherCAT stack. See the examples within ecmasterlib. Elmo drives could be used as follows

ecmasterlib::device::Elmo drive{};
auto &stack = ecmasterlib::EcMasterlibMain::createInstance(argc, argv, drive);
sleep(10);
std::cout << "init start\n";
drive.init([&stack]() { stack.sync(); });
drive.setMode(ecmasterlib::device::Elmo::Mode::PROFILE_VELOCITY);
drive.setTargetVelocity(1000);
drive.setMaximumTorque(300);
 
std::cout << "loop start\n";
while(stack.isRunning()) {
  std::cout << "Current Position: " << drive.getPosition() << '\n';
  sleep(1);
}

See EtherCat Teststand 

Modifications

If you switch to other drives or terminals or if you want to transmit a different set of PDOs, you have to undertake the following steps

1. Create or modify ENI-Files

2. Create or modify interface files accordingly